I was having problems with my float sticking. After realising my fuel filter wasn't "filtering" I replaced the bad filter with a new one. Since then I have had no problems with the float. It was running very rich though. Rich enough that using the choke didn't raise the rpm's at all. So I decided to take the carb apart and clean it out. After putting it all back together it runs better. No gas smell at the exhaust.
But.....
When I hit the accelerator it bogs a little before reving up. And when I give it the last 20% of accelerator while driving it bogs as well. I have less power to pull hills.
I didn't have much before.
Should I back the screw out a little more?
I backed it out until the idle reached it's max then 1 turn more.
