Inliners International Forums General Discussion Blown and Injected snowman4839 turbo build

Decent amount of work done. Cut the up pipe a little short before the t4 flange so it sits a little low and barely rubs on the upper a arm. Ordered another .5" t4 flange to put on top of the one welded onto the pipe to act as a spacer. Got the wastegate welded to where it is almost perpendicular at the bottom of the U on the up pipe which should be awesome for flow. Got the feed line ready and need to drill the hole for the drain line. Carb/intake/exhaust are all on and all good. New carb linkage I made works great. All that's left is just finishing mounting the turbo, doing the intake lines/BOV, drain line, and exhaust dump or out the back.



Don't worry the flange/wastegate don't hit the steering.