Yes. The wires in the sets are long enough to reach the furthest plug on a V8 engine. Typically you get 4 pairs of slightly different lengths plus a shorter wire for the coil to cap. Plenty long enough for any inline engine use. Simply cut the excess off the plain end, slide the distributer boot over it, strip back the outer cover about 1/2 inch and crimp on the metal terminal. Taylor sells a stripping and crimping tool but a single edge razor blade and a regular wire crimper will work just as well if you take it easy.
Spiro Pro wires have very little resistance compared to other resistor type wires and will not cause any RFI hum or static in electronic equip like CD players, etc. Win win as they say.
Last edited by Mike G; 10/20/11 07:00 PM.
