Sounds good.
I am not trying to copy your set-up.
Just like to hear about peoples builds.
What is your 60' times?
What is the boost pressure you are launching at?
On my Syclone, normally my torque converter brake stalls to 2100-2200 RPM.
I was doing some datalogging w/my Syclone & was really surprized on how much my stock converter actually brake stalled to.
At 19 PSi, the engine RPM was @ 3025.
Converter is just as tight as ever, I guess having an engine making 560 ft lbs of torque is going to make something give.
In this case, the converter was doing the giving.
My poor old stock original 700R4 is past it's limits. But it's still hanging in there, don't know for how long though.
MBHD
