It didn't go as planned. I was hoping to run a simple 90* bend (like Snowman did) but that wasn't the case. The control arm and frame were just too gosh-darn close! So I had to make some adjustments. It consists of a 180* cut close to the bends, leading to a 90* which leads to another 90*. I had to recycle the 2.5" piping from the wastegate that came with the turbo and another 90* bend from my Eclipse's original exhaust. The top isn't cut straight, but I'll worry about aligning that after I get the other pieces welded and ready. Should be this weekend for that. The cuts were made easy thanks to the purchase of a metal chop saw. A worthy investment for anyone who welds!
