The end play for the crank and cam measure as they should as does the lash on the timing gear. Cam bearing looks good. I measured the lift for the exhaust valves at the valve and they are with 1 thousandth. (the head is off so I cannot measure the intakes)But doing a stare and compare, the lobes for the intakes look fine and do not appear to be damaged.
Gearhead1:.. Fuel pump is next, and I'm running out of parts to check. I'm going to order a rebuild kit for the pump Monday as well as a new gasket kit for the motor.
I'm baffled..
Paul
