From my experience, usually the better Felpro gaskets do not stick too bad when disassembling an engine or removing a component.
That is part of the reason I look for getting better gaskets,(normally that is Felpro) you do not need to take forever to scrape off the old gaskets.

Speaking of baffles in oil pans, anyone have some pics on oil pans w/baffles trap door etc?

I had installed baffles in mine but would like to further upgrade.

I had to notch out a section in my oil pan to clear the rack & pinion set-up I installed.

So," while I'm in there", might as well make some better baffles.

Also suggest an oil pan company I should purchase one from?

I got in touch with AVIAID Oil Systems several years ago.
10041 Canoga Avenue
Chatsworth CA 91311-3004
818 998-8991 Phone
818 998-8993 Fax

" steel pan based on stock core for about $525, or a fabricated aluminum pan
for $640. Time frame would be about 4 weeks."


Thanks

MBHD


MBHD

12 port SDS EFI