Thanks for all the great input I know everyone just trying to help. I took it for a spin tonight and everything smooth no lean spot that back screw that was in secondary bowl was screwing with my float. I reset float which was set low and put 56 main
6.5 power valve 31 squirt nozzle pink cam and ran good I just don't have a lot rev up high i think I can go leaner on main jet.
When I had the 51 main jet in it ran like a raped ape but always had a lean dead spot down below. Im only going by seat of the paints and how the motor reacts to changes. I do have a bung welded for ob2 sensor maybe should look in to getting reader.
