I've tee'd in a PCV valve, but still wasn't happy with the performance, or rather lack of. I did some WOT blasts and it blew out a rubber plug that is on the oil fill tube and sent plenty of oil out the hole =/

So I'm re-doing the exhaust system and replaced the chambered flowmaster with a glass pack. Mostly because it's a flow through design and that it was $18 at the local parts store.

I have the exhaust system all tucked up under the car but I ran out of time to finish bolting up the collector to the manifold, re-installing the O2 sensor, etc. Minor stuff. Maybe today.

[img]https://scontent-b-dfw.xx.fbcdn.net/hpho...amp;oe=5488417E[/img]

[img]https://scontent-b-dfw.xx.fbcdn.net/hpho...amp;oe=5492B530[/img]

**Facebook still screwing my pictures =/