Hank: how'd you make the 90 degree bend without the bracket in the offy linkage? If it weren't for that I would agree with you.
The offy intake positions the carb 90 degrees from its normal orientation. They do this so both the primary bores on the Holley are facing equal distant towards the engine. If you turn it you'll send more air/fuel to either the front or rear cylinders.
You can see the linkage for the carb toward the front of the engine bay. I reused the stock linkage that was on the original intake for the kick-down. I don't have a close up of the modifications I made but I can get a pick in a few days when I get it all back together.
If there's a better way to do it I'm all for making it work better. I just didn't see it.
