Rods are in hand and I got a chance to check them.

All pics are taken with the new rod in a stock deck height block.

Deck height with stock type replacement piston is .065 down in hole. With new rod/ piston it is .030 . This block may have a taller than normal deck. It was not measured.

The rod did not touch the cam or oil pump. Some engines will need slight clearancing.

The rod weighed 10 Grams more than the stock rod shown.











Last edited by tlowe #1716; 07/22/15 09:09 AM.
Inliner Member 1716
65 Chevelle Wagon and 41 Hudson Pickup
Information and parts www.12bolt.com