As most people here know, there are 2 different diameters of water pump pulleys used and 2 different belt spacings used. The stock pulley shown in the picture is the smaller diameter of the 2. I put a large diameter water pump pulley on my car to slow down the fan and pump. The Crome pulley shown is used on sbc with a/c. There is also a bigger sbc water pump pulley that could maybe be used in the same way. On my nova the power steering belt is closest to the front of the car. Would there be room for the p/s belt to just run between the crank pulley and the p/s pump? It might clear the new water pump pulley but it would be close. The best chance would be if the wide belt spacing balancer and brackets were used. Jay6155
