Ordered a Comp Cams 260H:
http://www.compcams.com/Company/CC/cam-specs/Details.aspx?csid=60&sb=2
I know it says it's for trucks but I wanted just a bit more aggression than stock. Not a lot. Also ordered the recommended springs for it and new valves seals.
If I made the wrong choice please let me know ASAP so I can call and change the order.
I think I also have a leaking valve seal so it's a "while I'm in there" thing on that bit. Going to try the rope trick: Feed a rope into the spark plug hole to fill the piston. Hand rotate the crank until it stops on the rope. The rope will take up the space and keep the valve from dropping. Compress the spring, remove, and replace the seal then spring with new.
