That seams like a lot of work to gain .20 ci over what I did. I don't see that the .055 increase in stroke is worth the extra cost unless it helps get to zero deck. I really need to put mine together for real. I bought several sets of pistons that had a stated compression height that was was wrong. I read later that when replacement oversized pistons are made the CH is lowered to offset the rise in compression gained from the over bore. The Ross pistons I got from Tom should have, by my measurements, stuck out above the deck but they don't. At least in the mockup they didn't. I'll try to get them in soon so we have something real to look at.
