OK Found Cam Specs
Schneider Cam
Valvelift-.505
Advertised Duration-280 Intake and Exhaust
Measured at .050- 240 Intake and Exhaust
Camlift-.290 Intake and Exhaust
1.75 Roller Rockers
Solid Lifters
If anyone wants to chime in on Converter Stall, remember this will be street driven. More Street than Strip. It may see the occasional run at the local dragstrip. It has a TH350 behind it and will have a Manual Valve body behind it due to Carb Setup.
Note- 305 lbs torque at 2500 as low as dyno would read. Max Torque 315 at 4000.
I don't believe I lose anything by concentrating on the lower RPM when specing stall speed.
Expected Tire size is 30 inch with 3.73 gears.
