A friend of mine has a 235 in a '48 Diamond T truck. He has a 3X1 & a 2X1 intake & Fenton headers. Through some dealings with a friend of his he also has a Clifford's Research cam. The @.050 duration is 268 & 272 or so & a lift of .533. He is on a very limited budget & no internet access. I told him to try to sell that ridiculously big cam & get a "Bulldog" cam or have one ground. I think it's Dayton Cams in Tacoma. Any cam advice would be appreciated along with some head milling advice. It seems that people like to cut the heads .100 or so. He is also unsure of which intake to use. Any advice appreciated. Thanks in advance, Rod.
