My feed like is a 3/16th line from the rear port passanger side around to the top of the turbo
It is ball bearing it's the 60 series from turbonetics
Not close enough to run it
I added a oil pressure sender to the front port passanger side and cranked it with the plugs out via a battery it was getting 37 ish psi from that port but I had the same Guage on the port the turbo is hooked to now
I had the dizzy in and pumped it with the drill for like 30 second then cranked it pressure was up no oil to head
Last edited by lowboygmc; 01/25/17 12:07 AM.