I totally agree about the 2gc. With a little machine work either, but especially the small base could be made to fit a stock 1bbl manifold without an adapter. Jay
Jay, You know there's a lot of empty space in the intake that is the exhaust passageway. There's more to it than just drilling 2 new holes. (Did it for a Holley/Weber 2 bbl on my 194) For small carbs I'd suggest using an Offy intake with a custom drilled carb plate to replace the stock 4 barrel plate.
Pete
Last edited by Chevelle292Wagon; 03/18/1705:35 PM.