The 32/36s are likely too small for the 292. I ran them on the 235 motor and they ran really well. They worked on the 261 pretty well when I first got it running and driving around but they were necked down with the adapters on the Weiand 2X1. Yes, the Clifford set up is pricy. Took me a year to save for the purchase but really woke the motor up when I installed it. My guess is that if I had installed the Clifford 2X2 manifold and used the 32/36s, would not have run well at all. Has a water heat chamber cast into the manifold.
Last edited by mdonohue05; 03/30/18 01:11 PM.
