Originally Posted By: Keroppi
Originally Posted By: Beater of the Pack
In most of those the copper block can be turned around and it's like new.

I don't see how you would do that with this switch unless you ground off the solder/weld holding the button on and could pull out the copper piece...at least by looking at it. The one on the truck is fubar, the threaded post is spinning and won't tighten up...either that's my problem or I f#@$'d it up in removing and attaching the positive cable.
Yes they wear out.I have put several on my 53 in the last 40 years. Just think of it like brake pads. A lot of those years I had to use the starter a lot.
I kind of like the floor starter...it just adds to the charm of the truck... cool

New switch came today, Henco en China, so you know it's good! wink