Inliners International Forums General Discussion Truck Talk Keroppi, my 1946 Chevy 3100

Well, after some running back and forth to the hardware store, then ordering 10mm square nuts from McMaster, but only to find out that two of the legs were smaller...I got it mounted and have the pickup on the trailer waiting to be hauled down to the scale.

Keep in mind, this is a huge milestone...Being the bottom feeder that I am, the trailer needed tires, winch needed a solenoid, hitch on flat bed needed work...as did adding a brake controller for the trailer brakes...battery not as good as it can be, but using the charger with it while the winch is running. I'll need to get another battery for the winch.







PS - I should add, the fuel pump seems to be working fine, I pulled the choke out all the way, pumped the pedal 3 times, hit the starter and 2nd crank it fired. Pushed in the choke to about 1/2 or 1/3rd quickly and it idled nicely until warm.