292 cross flow head mock up

12 Port News - Features

12 Port History

Casting Numbers

Online Store

Tech Tips

Become a Member

Print Thread

Rate Thread

Re: 292 cross flow head mock up mick53 #97393 09/07/20 09:45 AM
Joined: Sep 2017 Posts: 209 Likes: 2 North Central Indiana M mick53 OP Contributor
OP mick53 Contributor M Joined: Sep 2017 Posts: 209 Likes: 2 North Central Indiana	I'm going to post a series of photos. I hope I don't get in trouble for posting too much. Here is a comparison of the head gaskets on the wrong head. Attached Images head gasket comparison 1 resize.jpg (269.06 KB, 333 downloads) head gasket comparision 2 resize.jpg (334.37 KB, 318 downloads) head gasket comparision 3 resize.jpg (256.36 KB, 457 downloads)

Entire Thread
Subject	Posted By	Posted
292 cross flow head mock up	mick53	08/27/20 10:58 AM
Re: 292 cross flow head mock up	mick53	08/27/20 11:04 AM
Re: 292 cross flow head mock up	panic	08/27/20 02:38 PM
Re: 292 cross flow head mock up	CNC-Dude #5585	08/27/20 04:36 PM
Re: 292 cross flow head mock up	panic	08/27/20 10:43 PM
Re: 292 cross flow head mock up	mick53	08/28/20 02:28 PM
Re: 292 cross flow head mock up	panic	08/28/20 05:26 PM
Re: 292 cross flow head mock up	mick53	08/29/20 11:19 AM
Re: 292 cross flow head mock up	panic	08/31/20 09:02 PM
Re: 292 cross flow head mock up	mick53	09/01/20 10:51 AM
Re: 292 cross flow head mock up	panic	09/01/20 11:18 AM
Re: 292 cross flow head mock up	mick53	09/05/20 02:14 PM
Re: 292 cross flow head mock up	panic	09/05/20 04:53 PM
Re: 292 cross flow head mock up	Twisted6	09/05/20 07:44 PM
Re: 292 cross flow head mock up	stock49	09/05/20 08:15 PM
Re: 292 cross flow head mock up	mick53	09/06/20 10:49 AM
Re: 292 cross flow head mock up	panic	09/06/20 11:52 AM
Re: 292 cross flow head mock up	Casual 6	09/06/20 12:44 PM
Re: 292 cross flow head mock up	Twisted6	09/06/20 07:55 PM
Re: 292 cross flow head mock up	Twisted6	09/06/20 08:05 PM
Re: 292 cross flow head mock up	Twisted6	09/06/20 08:16 PM
Re: 292 cross flow head mock up	panic	09/06/20 09:56 PM
Re: 292 cross flow head mock up	mick53	09/07/20 09:45 AM
Re: 292 cross flow head mock up	mick53	09/07/20 09:56 AM
Re: 292 cross flow head mock up	mick53	09/07/20 10:07 AM
Re: 292 cross flow head mock up	panic	09/07/20 10:16 AM
Re: 292 cross flow head mock up	mick53	09/07/20 10:26 AM
Re: 292 cross flow head mock up	mick53	09/07/20 10:23 AM
Re: 292 cross flow head mock up	Gearhead1	09/07/20 11:18 AM
Re: 292 cross flow head mock up	mick53	09/07/20 12:01 PM
Re: 292 cross flow head mock up	Casual 6	09/07/20 11:57 AM
Re: 292 cross flow head mock up	Twisted6	09/07/20 09:00 PM
Re: 292 cross flow head mock up	Casual 6	09/07/20 09:19 PM
Re: 292 cross flow head mock up	mick53	09/08/20 11:52 AM
Re: 292 cross flow head mock up	Casual 6	09/08/20 12:22 PM
Re: 292 cross flow head mock up	mick53	09/07/20 09:24 PM
Re: 292 cross flow head mock up	tlowe #1716	09/07/20 11:54 PM
Re: 292 cross flow head mock up	Gearhead1	09/08/20 11:16 AM
Re: 292 cross flow head mock up	CNC-Dude #5585	09/08/20 12:47 PM
Re: 292 cross flow head mock up	Twisted6	09/08/20 06:06 PM
Re: 292 cross flow head mock up	mick53	09/08/20 10:13 PM
Re: 292 cross flow head mock up	CNC-Dude #5585	09/09/20 09:17 AM
Re: 292 cross flow head mock up	mick53	10/10/20 03:27 PM
Re: 292 cross flow head mock up	efi-diy	10/26/20 11:25 PM
Re: 292 cross flow head mock up	TraditionalToolworks	10/20/20 11:01 PM
Re: 292 cross flow head mock up	D13again	04/21/21 12:41 PM

Moderated by stock49, Twisted6, will6er

Link Copied to Clipboard

Inliners International Forums General Discussion Hi Performance 292 cross flow head mock up