I want to sell a bunch of stuff as one lot. As near as I can tell, I have a Thickstun 1937/38 original casting dual intake, an as cast aluminum valve cover I made (similar to the CAW), a pair of 4.5" round as cast aluminum air cleaners, a couple mild cam/lifter sets (One Patrick's and one Delta), a pair of distributors recurved for these cams at GMCBubbas from the HAMB (one is points and one HEI converted from a stocker), a pair of BXOV-2 that need some help but they are there, a box of matched W1s, new set of rockers, 261 core that is apart but have all the extra stuff that we are both going to forget about (water pump cores, GMC oil pimp core, fuel pump cores, starters..... you get the idea). Would like to sell as a lot - $2500. Also have a side draft intake I started but not completed. I made a flange and put the downturns for exhaust on it and then make flange for SU carbs (6's) from Joe Curto (matched set from Volvo), carbs are gone through but are dirty now they need to be cleaned and the exhaust needs to be completed for your application - $550. I cant post pics here but PM me and I'll get questions answered and photos
